Even though my sister was asking for a food-related post, I thought I would switch things up with a DIY project that has been on my radar for quite some time. In fact, it was one of my first pins on Pinterest over a year ago.
I’m a big fan of Instagram and when I saw this elegant solution for displaying the small, filtered-applied photos, I knew that this was going in my house. The problem is that I never found the right frame. Specifically, a chunky, ornate one that won’t break the bank.
After I moved to St. Louis, I became acquainted with the Goodwill Outlet Store – yes, outlet. Instead of everything already being ridiculously cheap, at this location, you pay by the pound. The POUND! Five minutes after stepping foot in the store, I was walking out with this $1 beauty – it’s big and ornate but streamlined enough to be modern:
For this particular project, you’re going to need:
- Paint – a sample size of Valspar Cut Ruby did the trick
- Sand paper
- A hook – unless your frame is already equipped with one
- Wood screws – #4×1/2″ were small enough that they wouldn’t keep the frame from lying flat but long enough that they weren’t going to fall out
- Wire to hang the photos – I liked the mirror wire cord since it’s a little more industrial but jewelry or fishing wire would be just fine
- Mini wooden clothespins
The first step is sanding. You need to sand to not only get the finish off but also to rough up the frame a little bit so that the paint will stick. I used 80 grit to strip the finish but that was probably a little aggressive – anything between 40 and 60 would work. After about five minutes, you end up with this:
Step 2 is painting. Lay some newspaper on the floor and brush on some paint. After the first coat, I noticed that the wood grain was still showing through and while I didn’t love it at first, two more coats later and I decided to keep it that way – it adds character and breaks up the bright red color. If you’re looking for solid color, a coat of white primer would help you achieve that effect more successfully than painting color directly on the wood.
Now, it’s time to prep the back. This involves adding a hook, screws and wiring. To determine spacing, I laid my printed Intagram photos directly on the ground in a grid to see how many I had to work with – in this case, 30 (six across, five down). From there, I figured out the right measurements were 3″ between each wire with an inch from the top and the bottom. Put in the screws, add taut wiring between the two and voila! A clothes line for your mini clothespins and prints:
There are plenty of different patterns that you could hang your Instagram photos in. Personally, I went with a layout that was a little more organic, less organized and ultimately easier to make look deliberate – the perfect grid would have been much harder to keep up.
- Frame – $1
- Hook – $1.58
- Paint sample – $2.98
- Sand paper – $4.47
- Mini clothespins – $2.99
- Wood screws – $2.36
- Mirror wire – $5.88
- Total – $21.26
The key to keeping this cheap is the frame. Steer clear of Michael’s and Hobby Lobby where they go from $30-$50 and you’ll be doing just fine.
What projects have you been working on lately? Any Pinterest pins you’ve had your eye on?
PS: If you’re looking for the perfect site to get your Instagram prints from, I recommend Prinstagram – 50 photos for $12.